Munafa Stock Market Course + Intraday & FNO calls 
Munafa Macpower Cnc Machines Ltd (MACPOWER) stock tips, volume analysis, indicator analysis [intraday, positional] for today and tomorrow
Munafa Macpower Cnc Machines Ltd (MACPOWER) stock tips, volume analysis, indicator analysis [intraday, positional] for today and tomorrow Macpower Cnc Machines Ltd intraday tips for today and tomorrow
Macpower Cnc Machines Ltd (MACPOWER) Indicator analysis
Recent prices of MACPOWER Macpower Cnc Machines Ltd are as follows: Daily volume is divided by 10 day averaged volume
| Date | Close | Range | Change % | Volume |
| 16 Fri Jan 2026 | 921.80 | 919.00 to 940.90 | -1.36% | 0.56 times |
| 14 Wed Jan 2026 | 934.50 | 925.00 to 961.10 | -2.02% | 0.46 times |
| 13 Tue Jan 2026 | 953.80 | 951.00 to 985.80 | -1.3% | 0.71 times |
| 12 Mon Jan 2026 | 966.40 | 920.00 to 978.00 | 0.61% | 1.49 times |
| 09 Fri Jan 2026 | 960.50 | 954.10 to 990.40 | -2.4% | 0.75 times |
| 08 Thu Jan 2026 | 984.10 | 962.20 to 1010.00 | -0.9% | 1.6 times |
| 07 Wed Jan 2026 | 993.00 | 985.30 to 1012.30 | 1.29% | 1.05 times |
| 06 Tue Jan 2026 | 980.40 | 961.10 to 1013.80 | -2.29% | 1.2 times |
| 05 Mon Jan 2026 | 1003.40 | 1000.00 to 1025.90 | -1.57% | 1.05 times |
| 02 Fri Jan 2026 | 1019.40 | 1007.60 to 1028.10 | -0.34% | 0.65 times |
| 01 Thu Jan 2026 | 1022.90 | 1015.10 to 1045.80 | -0.71% | 1.04 times |
| 31 Wed Dec 2025 | 1030.20 | 1009.20 to 1034.60 | 2.14% | 0.9 times |
Macpower Cnc Machines Ltd stock tips (delivery Volume analysis)
Total 5 day volume for Macpower Cnc Machines Ltd is 30518, out of which 16224 went into delivery, which is 53.16 percent of total volumes
Volumes in the last session was 4276, out of which 2937 went into delivery, which is 68.69 percent of total volumes.
Its safe to say that enough delivery is being taken in the stock to conclude that the trend below will continue for a couple of days.
Macpower Cnc MACPOWER intraday stock tips
16 Friday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, and it has been below this line for quite some time now. This is not a good sign, stock might keep falling and stock might move lower...
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but trade for tomorrow is selective. Take a sell trade only if Macpower Cnc stays below 944.1, but if it comes above 944.1, then a intra day buy could be more profitable.
If you take a sell trade below 944.1, then use 944.1 as stoploss and 904.8 as target. However if you take a buy trade in Macpower Cnc, then use 944.1 as stoploss and 976.76 as target.
14 Wednesday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, and it has been below this line for quite some time now. This is not a good sign, stock might keep falling and stock might move lower...
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but trade for tomorrow is selective. Take a sell trade only if Macpower Cnc stays below 953.4, but if it comes above 953.4, then a intra day buy could be more profitable.
If you take a sell trade below 953.4, then use 953.4 as stoploss and 918.4 as target. However if you take a buy trade in Macpower Cnc, then use 953.4 as stoploss and 982.54 as target.
13 Tuesday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, and it has been below this line for quite some time now. This is not a good sign, stock might keep falling and stock might move lower...
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but trade for tomorrow is selective. Take a sell trade only if Macpower Cnc stays below 962, but if it comes above 962, then a intra day buy could be more profitable.
If you take a sell trade below 962, then use 962 as stoploss and 931.3 as target. However if you take a buy trade in Macpower Cnc, then use 962 as stoploss and 987.6 as target.
12 Monday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, and it has been below this line for quite some time now. This is not a good sign, stock might keep falling and stock might move lower...
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but trade for tomorrow is selective. Take a sell trade only if Macpower Cnc stays below 967.7, but if it comes above 967.7, then a intra day buy could be more profitable.
If you take a sell trade below 967.7, then use 967.7 as stoploss and 939.4 as target. However if you take a buy trade in Macpower Cnc, then use 967.7 as stoploss and 991.16 as target.
09 Friday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, but it crossed this line recently, which means that it could show a small or a large recovery soon enough depending on its trend.
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but trade for tomorrow is selective. Take a sell trade only if Macpower Cnc stays below 971.6, but if it comes above 971.6, then a intra day buy could be more profitable.
If you take a sell trade below 971.6, then use 971.6 as stoploss and 945.1 as target. However if you take a buy trade in Macpower Cnc, then use 971.6 as stoploss and 993.77 as target.
08 Thursday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, but it crossed this line recently, which means that it could show a small or a large recovery soon enough depending on its trend.
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, but stock is semi over sold and there are some chances of seeing a recovery tomorrow. Use 977.4 as stoploss in an intra day buy trade for a target of 997.27. However, stock will show a bearish move below 977.4.
07 Wednesday January Stock tips for Macpower Cnc Stock is trading below an important moving average line, but it crossed this line recently, which means that it could show a small or a large recovery soon enough depending on its trend.
It appears as if Macpower Cnc MACPOWER gave a large move recently.
My analysis of Macpower Cnc is bearish for shortterm, and stock might move down till 979.1 or till 955.6. Use a stoploss of 998.66 and if the stock hits stoploss, then it can shoot up till 1018.23
Macpower Cnc MACPOWER tips for tomorrow
Munafa value: 50
If this Munafa value is near or nearing 100, then this stock might show an upward movement. However, if this value is near or nearing 10, then this stock might very well show a downward movement.
If the Munafa value is near 50, then the stock might show a sideways movement.
Quick Charts: Renko Point & Figure Just IntraDay All Indicators Weekly Monthly All in One Eagle View MACD & ADX
Videos related to: Munafa Macpower Cnc Machines Ltd (MACPOWER) stock tips, volume analysis, indicator analysis [intraday, positional] for today and tomorrow
Hindi Video How To Be Successful Share Market Rich Like Jhunjhunwala, Vijay Kadia. Exact Steps!
Hindi Video The Truth Of Stock Markets That Everyone Is Hiding From You
![Munafa Macpower Cnc Machines Ltd (MACPOWER) stock tips, volume analysis, indicator analysis [intraday, positional] for today and tomorrow](https://munafasutra.com/images/MunafaBookCover.png)
