Munafa Stock Market Course + Intraday & FNO calls 
Macpower Cnc (MACPOWER) Technical (Analysis) Reports Macpower Cnc ["Technical Analysis"] Reports -NSE Stock Exchange MunafaSutra.com
Complete & easy to understand technical analysis of Macpower Cnc (MACPOWER)
Technical Analysis Report for NSE stock MACPOWER Macpower Cnc. Dated: 16 Jan 2026 Updated Daily. Stock trades under REAL_ESTATE_INVESTMENT_TRUST in NSE stock exchange
If you are looking for Tomorrow's Movement Predictions for NSE stock MACPOWER Macpower Cnc then click here. or read Experts views on Macpower Cnc or Forecast & share price targets of Macpower Cnc
Macpower Cnc Opened at 922.80 and Closed at: 921.80, which is -1.38% of previous session's close. It moved within a range of 919.00 and 940.90
The session was a Bearish session with an average volume of 4276, which is 17.75% of previous session's volumes.
- The stock has fallen, and its short term trend is also negative and in a downtrend.
- Even though the stock has fallen, but its mid term trend is positive and in an uptrend.
- Even though the stock has fallen, but its long term trend is positive and in an uptrend.
A Dead cross was found 5 days back on short term averages
Support for tomorrow is 909.45 and resistance for tomorrow is 931.35
These support and resistance points are valid for the first 5-15 minutes charts
Above are simple pivot point calculations. For a list of much stronger support and resistance levels click here. These are way more stronger support and resistance levels, and mark trend reversals and are Support & Resistance levels recommended by experts.
Support for tomorrow's hourly charts is 913.57, 905.33 resistance for tomorrow's hourly charts is 935.47, 949.13
10 Day SMA for Macpower Cnc (MACPOWER) is 971.73 and stock is trading below these levels. This is not a good sign for its short term trend
20 Day SMA for Macpower Cnc (MACPOWER) is 993.52 and the stock is trading below these levels. This is not a good sign for its mid term trend
50 Day SMA for Macpower Cnc (MACPOWER) is 959.27 and the stock is trading below these levels. This is not a good sign for its mid to long term trend
100 Day SMA is 903.19 and the stock is trading above these levels. This is a good sign for its long term trend
200 Day SMA Macpower Cnc is 1047.78 and stock is trading below these levels. This is not a good sign for its long term trend
20 DMA of Macpower Cnc is at 993.52 and 200 DMA is at 1047.78, while 50 DMA and 100 DMA are at 959.27 and 903.19 respectively
Macpower Cnc (MACPOWER) moving average of 20 SMA is at 993.52 and 20 EMA is at 976.76
| Date | Closing Price | 20 SMA | 20 EMA |
| 16 Fri Jan | 921.80 | 993.52 | 976.76 |
| 14 Wed Jan | 934.50 | 995.64 | 982.54 |
| 13 Tue Jan | 953.80 | 999.12 | 987.6 |
| 12 Mon Jan | 966.40 | 1002.01 | 991.16 |
| 09 Fri Jan | 960.50 | 1004.37 | 993.77 |
| 08 Thu Jan | 984.10 | 1006.1 | 997.27 |
Macpower Cnc (MACPOWER) moving average of 50 SMA is at 959.27 and 50 EMA is at 963.26
| Date | Closing Price | 50 SMA | 50 EMA |
| 16 Fri Jan | 921.80 | 959.27 | 963.26 |
| 14 Wed Jan | 934.50 | 956.97 | 964.95 |
| 13 Tue Jan | 953.80 | 954.76 | 966.19 |
| 12 Mon Jan | 966.40 | 952.52 | 966.7 |
| 09 Fri Jan | 960.50 | 950.35 | 966.71 |
| 08 Thu Jan | 984.10 | 948.28 | 966.96 |
Macpower Cnc (MACPOWER) moving average of 100 SMA is at 903.19 and 100 EMA is at 955.92
| Date | Closing Price | 100 SMA | 100 EMA |
| 16 Fri Jan | 921.80 | 903.19 | 955.92 |
| 14 Wed Jan | 934.50 | 902.34 | 956.61 |
| 13 Tue Jan | 953.80 | 901.24 | 957.06 |
| 12 Mon Jan | 966.40 | 899.7 | 957.13 |
| 09 Fri Jan | 960.50 | 898.31 | 956.94 |
| 08 Thu Jan | 984.10 | 897.2 | 956.87 |
Macpower Cnc (MACPOWER) moving average of 200 SMA is at 1047.78 and 200 EMA is at 904.79
| Date | Closing Price | 200 SMA | 200 EMA |
| 16 Fri Jan | 921.80 | 1047.78 | 904.79 |
| 14 Wed Jan | 934.50 | 1044.66 | 904.62 |
| 13 Tue Jan | 953.80 | 1041.52 | 904.32 |
| 12 Mon Jan | 966.40 | 1038.31 | 903.82 |
| 09 Fri Jan | 960.50 | 1035 | 903.19 |
| 08 Thu Jan | 984.10 | 1031.68 | 902.61 |
Uniinfotelecomserviltd has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Uniinfotelecomserviltd, about 0.9% more returns!
Shree Vasu has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Shree Vasu, about 1.98% more returns!
Adroit Infotech has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Adroit Infotech, about 2.93% more returns!
Bandhan Bank has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Bandhan Bank, about 4.19% more returns!
Bombay Super has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Bombay Super, about 3.37% more returns!
Centrum Capital has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in Centrum Capital, about 0.6% more returns!
Macpower Cnc has performed better than Chemfab Alkalis in short term. Holding Macpower Cnc could be a better choice for now!
E2e Networks has performed better than Macpower Cnc in short term. You could have earned much better returns by investing in E2e Networks, about 15.31% more returns!
Macpower Cnc has performed better than Sri Havisha in short term. Holding Macpower Cnc could be a better choice for now!
Macpower Cnc has performed better than Indostar Capital in short term. Holding Macpower Cnc could be a better choice for now!
Macpower Cnc has performed better than Lemon Tree in short term. Holding Macpower Cnc could be a better choice for now!
Macpower Cnc has performed better than Power Instrument in short term. Holding Macpower Cnc could be a better choice for now!
Macpower Cnc has performed better than Pitti Engineering in short term. Holding Macpower Cnc could be a better choice for now!
Macpower Cnc Technical analysis of indicators
Price action analysis of Macpower Cnc (MACPOWER) based on a short term time period is definitely negative. This means that there is a strong downtrend in the stock for given time period. Sellers are extremely active on this stock.
ADX buy sell signal for Macpower Cnc stock for short term is SELL. Signal strength is Strong and stock is gaining momentum.
MACD generated a SELL signal for Macpower Cnc in short term and the sell signal is strong.
Macpower Cnc Stock is trading near its recent LOWS in short term which reflects strong selling momentum. Bears are getting stronger in this stock.
Ichimoku cloud is of green color and prices are in or below the green cloud Prices appear to be coming down
CCI has generated a SELL signal for Macpower Cnc in short term and SELL signal is strong!
RSI is generating a BUY signal in short term and the buying is gaining momentum.
MRSI is in negative zone. This is the SELL zone
Although the stock is in the SELL zone, but selling might be slowing down
Stock of Macpower Cnc is picking up selling momentum according to indicator.
Volume based indicators are showing selling momentum.
Volume Weighted Averaged Price (VWAP) for short term is 976.24 and Macpower Cnc MACPOWER stock is trading below this level. This means that stock is falling with high volumes. VWAP is falling down
People seem to be coming out and selling the Macpower Cnc MACPOWER stock. Volume based technical analysis of Macpower Cnc MACPOWER stock is negative.
Macpower Cnc Stock has given negative returns over a short term period. Returns for a longer term period have been negative.
Force Index is moving in a negative zone, which indicates selling momentum for short term... Selling momentum is getting weaker.
Tomorrow's Predictions
You should also read Tomorrow's Movement Predictions for NSE stock MACPOWER Macpower Cnc These predictions are based on various factors, are easy to understand, and upto 75% accurate!
And MACPOWER Experts View which covers a lot of information including buying and selling signals
MACPOWER future forecast & share price targets
You can also take a look at the Charts and indicator analysis here Announcements & NEWS by Macpower Cnc or View Candle Stick Charts here
Quick Charts: Renko Point & Figure Just IntraDay All Indicators Weekly Monthly All in One Eagle View MACD & ADX
Videos related to: Macpower Cnc (MACPOWER) Technical (Analysis) Reports Macpower Cnc ["Technical Analysis"] Reports -NSE Stock Exchange MunafaSutra.com
Hindi Basics How To Trade In FnO Futures Options Stock Market
Hindi Video The Truth Of Stock Markets That Everyone Is Hiding From You
- NSE Screeners
- NSE Daily Screener
- NSE Weekly Screener
- NSE Monthly Screener
- Support & Resistance
- NSE Shares Near Support
- NSE Shares Near Resistance
